Warning: Use of undefined constant simple_breadcrumb - assumed 'simple_breadcrumb' (this will throw an Error in a future version of PHP) in /home/btmetals/public_html/wp-content/themes/btmetals/single_product.php on line 4

Hot Rolled Sheet

Ranging from low carbon, high strength low alloy, P&O, and floor plate

Hot Rolled Sheet

GR100

Extensive flat roll in both coil and leveled to common pattern sizes.
GR100
GR100 Flat roll inventory ranging from 11ga to 4mm thick in widths of 48”, 52”, to 60” wide.
Yield KSI 100
Tensile KSI 110
Elongation % in 2" 15 Min
Brinell Hardness 250
C - Carbon 0.12
Mn - Manganese 2
P - Phosphorus 0.025
S - Sulphur 0.01
Si - Silicon 0.6
Cb - Columbium 0.06
Al - Aluminium 0.015
Ti - Titanium 0.02

A1011-80

A1011-80
Sizing ranging from 12ga to 10ga thick in widths of 48” to 60” wide. Standard lengths are inventoried for man stocking sizes but also can source for other sizes.
Yield KSI 80
Tensile KSI 90
Elongation % in 2" 16 - 18 Min
C - Carbon 0.15
Mn - Manganese 1.65
P - Phosphorus 0.02
S - Sulphur 0.025
Cu - Copper 0.2
Ni - Nickel 0.2
V - Vanadium 0.005
Cb - Columbium 0.005
Cr - Chromium 0.15
Mo - Molybdenum 0.06
Ti - Titanium 0.005

A1011CQ

A1011CQ
Flat roll inventory ranging from 16ga to 10ga thick in widths of 48” 84” wide including 14ga 72” and 10ga 84” wide. Standard lengths of 96”, 120”, 144” and 240” are available and other desired lengths can be sourced.
N/A -
C - Carbon 0.15
Mn - Manganese 0.6
P - Phosphorus 0.03
S - Sulphur 0.035
×